Eye-Configuration: Five Operation Plug: Active Cockpit Pilot Assign: James Marshall Main Core: Keiko Ishikawa Berserk: Zero Times Made in Hong Kong Manufactured by Savior Underground

History of Savior Prototype Model The Prototype was the first Savior robot to be produced as an alternative to the E project. While it was manufactured and put together in Hong Kong, it was designed and tested in Japan. As a prototype, the main functions that were present in the Savior were very similar to those in the EVA-00 Prototype. The Techniques of Savior Prototype Model The technique of manufacturing the Prototype were much more advanced than those of the Evangelions. Due to the fact that the Savior was all machine, (with the exception of its red core) it meant that it was very stable and did not go berserk. However, seeing that the Savior was a mechanical robot, it wasn't quite as agile as an Evangelion. Unlike an EVA, it ran on a portable nuclear engine that was fixed on its back. This source of power supplied the Savior with enough energy for 150 days of constant activation. More About Savior Prototype Model The only part of the Savior which was Angelic was the A.T. field generating core fitted on its chest. Apart from the core, it was entirely composed of machinery, with most of its parts based on the "Advanced Hydraulic Thereom" that was devised by Kazuya Hashizawa and Kaita Hibiki. The Savior project closed down in 2013 due to financial difficulties and all work on the robot stopped. Three years later, the Savior Prototype suddenlyy resurfaced to challenge NERV and its EVAs.